Vinylcorp® Vinyl Trims
Impact Resistance, Corrosion Resistance, Lightweight
Vinyl bead, drywall and veneer accessories are manufactured using lead-free, virgin vinyl compounds, formulated to have durability and impact resistance. Excellent paint adhesion properties with no priming required. Vinyl trims are commonly installed using glue and staples.
Manufactured for Bailey by: 
With over 30 years of industry experience, Vinyl Corp is committed to producing the finest wall and ceiling accessories in the industry. Our commitment to quality and manufacturing standards makes Vinyl Corp one of the most reliable names in the industry. Now partnering with Bailey Metal Products Ltd., combines two of the most recognized names in the industry. Both companies are committed to offering the highest quality products, services and technical support.
Vinyl Corner Beads
Vinyl Corner Bead is a rigid, easy-to-apply 90º corner reinforcement that can be nailed or stapled into place. Multiple perforations along the 1-1/4" flanges enhance joint compound bonding. The pronounced nose provides a ground and screed to help the finisher achieve precise finishing depth. Rigid vinyl is dent resistant, rust proof and maintains shape with no sharp edges or burrs when field cut. All vinyl products readily accept finish treatments such as paint and spray or roll-on textures.
• Rust proof and dent resistant.
• Multiple perforations enhance joint compound bonds.
• Maintains shape with no sharp edges or burrs when field cut.
• Easily cut with snips, utility knives or scissors.
• Available stocked in 8' and 10' lengths.
Vinyl Arch Beads
Arch Beads Designed with special factory “T” slotted flange that allows bead to be used as a conventional corner or by easily cutting end of “T”-slotted flange allows bead to form curves or arches as needed. Arch Beads- Designed with factory slotted flange that easily forms to curves or arches. Perforated flanges accept joint compound or veneer plaster.
Vinyl J-Beads
Vinyl J-Bead provides a finished edge at gypsum board stops around door and window openings and at ceiling intersections. Requires no joint compound. Rigid vinyl is not a thermal transmitter and helps stop condensation where gypsum board terminates at exterior metal surfaces, such as window frames and mullions. Rust proof and dent resistant. Available in 10' lengths with 1/2" width.
• Moisture and dent resistant.
• Produces finished edges at panel terminations.
• Requires no joint compound.
• Nail or slip on.
Vinyl F-Beads
Drywall “F” Beads- Designed with a fine profile to cover raw edges of wallboard.
Muddable J-Beads
Muddable “J” Beads- Designed to cover raw edges of wallboard. Perforated flange accepts joint compound or veneer plaster for a flush finish.
Vinyl L-Beads
“L” Beads (Surface Application) – Designed to cover raw edges of wallboard. Perforated flange accepts joint compound or veneer plaster for a flush finish.
Ceiling Trims
Celling Trim (Surface Application with Removable Leg) – Designed to prevent staining of finished ceilings, windows or dissimilar materials. Perforated flange accepts joint compound or veneer plaster for flush finish.
Bullnose Corner Beads
Bullnose Corner Bead (3/4" Radius) – 3/4" Radius Corner Bead provides hard to damage, straight, rust-proof, dent-resistant soft corners. Perforated flanges accept joint compound or veneer plaster for a flush finish.
Bullnose Arch Beads
Bullnose Arch Bead (3/4" Radius) – 3/4" Radius Corner Bead with factory slotted flange that easily forms to curves or arches that provide hard-to damage, rust-proof soft corners. Perforated flanges accept joint compound or veneer plaster for a flush finish.
3/4" Transition Bullnose Drywall Accessories
Transitions – designed to eliminate gaps between Bullnose Corner Bead and baseboard or crown molding. Can be used with plastic or metal beads, and with baseboard or crown moldings up to 4-3/4" wide.
2-Way inside ¾” Bullnose Corner Cap 90º
Vinyl 2-Way ¾" Corner Caps provide the ideal component to transition bullnose corner beads to a crisp finish where inside corners intersect at 90º. Examples of applications include windows, closets, doorways, skylights, etc. Easy to install, this component provides a cost-effective alternative to time-consuming mitering of corners.
• Easy to install.
• Rust proof and dent resistant.
3-Way inside ¾” Bullnose Corner Cap 90º
3-Way ¾" Bullnose 90º Corner Caps provide the ideal solution to finish corners quickly and efficiently at three-way 90º ¾" intersections. This corner cap features extended tabs for easier alignment and a professional finish, and it works well with both metal and vinyl bullnose corner beads. Bullnose Corner Cap eliminates the need for special corner bead applications and time-consuming mitering.
• Easy to install.
• Huge labour saver.
• Favourite of metal Bullnose Corner Bead users.
3-Way Bullnose splayed
Three Way Splayed – Ideal for use where three corners intersect at angles of greater than 90º degrees. Alignment tongues make it easy to match with Bullnose Corner Bead.
3-5/8" Partition End Caps
3–5/8" Partition End Caps (Surface Application) – Designed with a special factory “T” slotted flange allowing Partition End Cap to be used in a conventional manner, or by easily cutting end of “T” slotted flange allows cap to form arches or curves as needed.
2–1/2" Partition End Caps
2–1/2” Partition End Caps (Surface Application) –Designed with a special factory “T” slotted flange allowing Partition End Cap to be used in a conventional manner, or by easily cutting end of “T” slotted flange allows cap to form arches or curves as needed.
Control Joints
Control Joint (Surface Application with Removable Tape) –Provides stress relief and assists in controlling cracking in large areas of wallboard. Designed to be applied after wallboard is installed. Perforated flanges accept joint compound or veneer plaster for a flush finish.